Follow us:
404!
Nothing was found at this location. Try searching, or check out the links below.
New In Store
-
Fasteners, Hex Head, Screws, Self Drilling
SCREW 14-14 SELF DRILLING HEX WITH WASHER COARSE THREAD C4
Self-drilling hex head screw with EPDM sealing washer for fastening through mild steel in metal brackets, components, steel sections and assemblies where a rubber seal is required.
Available in:
| 14-14 X 115mm |
| 14-14 X 135mm |
| 14-14 X 150mm |
| 14-14 X 175mm |
| 14-14 X 205mm |SKU: n/a -
Fasteners, Hex Head, Screws, Self Drilling
SCREW 14-14 SELF DRILLING HEX COARSE THREAD C4
Self-drilling hex head screw for fastening through mild steel in metal brackets, components, steel sections and assemblies.
Available in:
| 14-14 X 115mm |
| 14-14 X 125mm |
| 14-14 X 135mm |
| 14-14 X 150mm |
| 14-14 X 175mm |
| 14-14 X 205mm |SKU: n/a -
Fasteners, Hex Head, Screws, Self Drilling
SCREW 14-20 SELF DRILLING HEX WITH WASHER FINE THREAD C4
Self-drilling hex head screw with EPDM sealing washer for fastening through mild steel in metal brackets, components, steel sections and assemblies where a rubber seal is required.
Available in:
| 14-20 X 25mm |
| 14-20 X 45mm |
| 14-20 X 65mm |
| 14-20 X 115mm |SKU: n/a
Product Categories
Popular Products
-
Neutral Cure Silicones, Sealants & Adhesives, Silicones
PROSIL 30 100% Neutral Silicone – Matt Black 600ml Sausage
PROSIL 30 is a premium extra high strength medium modulus one part moisture curing, 100% calcium carbonate filled, high performance neutral cure silicone sealant designed to give superior adhesion and durability in a wide range of glazing, weather sealing, and trade applications.
It has been specifically formulated for professional glazing. It will bond to form a strong weatherproof seal on most common building materials such as: glass, ceramic, steel, aluminium, brick, concrete, most plastics etc. Weathering and UV resistance is excellent and its superior physical properties are retained over many years exposure.
ADVANTAGES
PROSIL 30 has excellent adhesion properties superior to most other silicone and will adhere to most common building materials including :
Glass, aluminium, concrete and plastics, wood, masonry and most powder coated surfaces.5-8 minute skin time- Extra low gloss
- Superior Adhesion
- Medium Modulus for higher strength with good movement (out standing elongation)
- Contains no hydro treated petroleum distillate (extender)
APPLICATIONS
PROSIL 30 is ideal in glazing, where a matt finish is required: General purpose glazing, colonial bars, and structural butt joints. Weather-sealing of high rise buildings, Installation of solar panels. It is also often used in truck and caravan assembly due to its excellent adhesion and high flexibility.
SKU: 29/PS30MB/S -
Dust Masks, Industrial Supplies, PPE, Safety Products
MAXIPAK SILICONE HALF MASK ‘PAINTERS’ RESPIRATORY KIT
Maxisafe’s “MaxiPak” ‘Silicone Painter’s Kit is the premium choice for painter’s requiring respiratory protection from fumes. Includes A1 Gas Filters and P2 Particle Prefilter with retaining cap. Conveniently packed in a resealable storage container, providing protection for the respirator and filters. Mask is made from 100% Silicone for maximum comfort.
SKU: 58/RRX01PK-L -
Fasteners, Flush Head Sleeve Anchors, Masonry Fixings, Sleeve Anchors
SLEEVE ANCHOR FLUSH HEAD – 10MM DRILL DIAMETER
The Flush Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a flush head leaving the fixture with a more discrete /clean finish than a traditional hex head sleeve anchor. Ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 45mm, 55mm, 65mm, 80mm and 100mm
Available in Zinc.
SKU: n/a -
Drill Bits, Drill Bits & Drivers, Jobber Bits
3/8″ REDUCED SHANK HSS DRILL BITS
Bordo 2647 Series – Assorted sizes available
Bordo reduced shank HSS drills are ground and then a black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating. This surface aids chip flow and heat dissipation. The drill is then ground a second time to achieve a bright finish on the shank and cutting edges.
SKU: n/a