Follow us:
404!
Nothing was found at this location. Try searching, or check out the links below.
New In Store
-
Fasteners, Hex Head, Screws, Self Drilling
SCREW 14-14 SELF DRILLING HEX WITH WASHER COARSE THREAD C4
Self-drilling hex head screw with EPDM sealing washer for fastening through mild steel in metal brackets, components, steel sections and assemblies where a rubber seal is required.
Available in:
| 14-14 X 115mm |
| 14-14 X 135mm |
| 14-14 X 150mm |
| 14-14 X 175mm |
| 14-14 X 205mm |SKU: n/a -
Fasteners, Hex Head, Screws, Self Drilling
SCREW 14-14 SELF DRILLING HEX COARSE THREAD C4
Self-drilling hex head screw for fastening through mild steel in metal brackets, components, steel sections and assemblies.
Available in:
| 14-14 X 115mm |
| 14-14 X 125mm |
| 14-14 X 135mm |
| 14-14 X 150mm |
| 14-14 X 175mm |
| 14-14 X 205mm |SKU: n/a -
Fasteners, Hex Head, Screws, Self Drilling
SCREW 14-20 SELF DRILLING HEX WITH WASHER FINE THREAD C4
Self-drilling hex head screw with EPDM sealing washer for fastening through mild steel in metal brackets, components, steel sections and assemblies where a rubber seal is required.
Available in:
| 14-20 X 25mm |
| 14-20 X 45mm |
| 14-20 X 65mm |
| 14-20 X 115mm |SKU: n/a
Product Categories
Popular Products
-
Adhesive Sealants, Sealants & Adhesives
PVC PIPE CEMENT TYPE N – CLEAR 500ML
PVC Pipe Cement Type N is formulated as a high bond strength, quick setting, PVC pipe cement in all non-pressure applications for bonding PVC pipe and fittings with a diameter of 10cm or less. Available in blue and clear. WaterMark certified and tested to AS/NZS 3879. Also suitable for potable drinking water applications AS/NZS 4020.
SKU: 26/SOLCC -
Glasses & Goggles, Industrial Supplies, PPE, Safety Products
MAXISAFE FACESHIELD & BROW GUARD
- Complies with AS/NZS 1337
- Medium Impact Resistant
- Ratchet adjustable head gear
- Replaceable polycarbonate visor and chinguard
- High impact, smoke shade 3 and shade 5 visors also available
- Quick lock clips for quick and easy visor replacement
- Protection from fluid splash, particles and dust
SKU: 58/EBF457A -
Fasteners, Light Duty, Masonry Fixings, Wallmates
NYLON WALL MATE PLASTER-BITES – 100 BOX
ICCONS nylon plaster-bites are a single piece, self drilling drywall anchor. Available in both drill-point for quick installation or fish-mouth to accommodate for any length of screw. The sharp thread profile cuts smoothly though the drywall ensuring maximum holding capacity. Accommodates both 6 and 8 gauge screws.
SKU: 20/WALLN -
Drill Bits, Drill Bits & Drivers, Panel Bits
BRIGHT SINGLE ENDED PANEL DRILL BITS
Bordo 2346 Series – Assorted sizes available
A bright finish tool has no surface treatment and is supplied in the as-ground condition. These tools are suitable for general purpose use, particularly for non- ferrous applications.
Available in: | No.11 | No.20 | No.30 |
SKU: n/a